Black, empty, INT 300x225xH132(33+99)mm, EXT 336x300xH148mm, 1,62kg, 8,91L

OT FIT 30/220-240/700 CS PCConstant Current SELV drivers with leading- or trailing-edge dimming.The compatibility with the most common leading-edge and trailing-edge phase dimmers and the possibility of dimming from 5-100% marks one of the key characteristics. Optional orange cable clamp E-style LEDOTCLAMPE, for independent mounting, to be ordered separatelyProduct family benefits:Compatible with the most common leading-edge and trailing-edge phase dimmersFlexible current setting (DIPswitch – 2 to 4 currents)Flicker-free dimmingHigher quality of light thanks to < 5% output ripple currentHousing from 80% recycled plasticAreas of application:Decorative illuminationDownlights, flat luminairesHospitalityLiving areasMuseums, residential buildingsOfficesShop lightingSuitable for indoor SELV installationsSuitable for luminaires of protection class I and IIElectrical data:Nominal input voltage: 220-240 VMains frequency: 50-60 HzInput voltage AC: 198-264 VTotal harmonic distortion: < 20 %Power factor λ: 0.90C-0.97Efficiency in full-load: 84 %Device power loss: 5.0 WProtective conductor current: <0.7 mAInrush current: < 10 AMax. ECG no. on circuit breaker 10 A (B): 26Max. ECG no. on circuit breaker 10 A (C): 26Max. ECG no. on circuit breaker 16 A (C): 41Max. ECG no. on circuit breaker 16 A (B): 41Max. ECG no. on circuit breaker 25 A (B): -Surge capability (L/N-Ground): 2 kVSurge capability (L-N): 1 kVNominal output voltage: 27-40 VU-OUT (working voltage): 60 VNominal output current: 500 / 700 mAOutput current tolerance: ±10 %Output ripple current (100 Hz): < 5 %Output PSTLM: ≤1Output SVM: ≤0.4Nominal output power: 13.5-28 WMaximum output power: 28 WGalvanic isolation primary/secondary: SELVDefault output current: 700 mACurrent set: DipSwitchDimensions & weight:Product weight: 109.00 gCable cross-section, input side: 0.5-1.5 mm²Cable cross-section, output side: 0.5-1.5 mm²Wire preparation length, input side: 7-8 mmWire preparation length, output side: 7-8 mmWidth: 53.0 mmHeight: 30.0 mmLength: 95.0 mmColors & materials:Casing material: PlasticTemperatures & operating conditions:Ambient temperature range: -20 +50 °CMaximum temperature at tc test point: 75 °CMax.housing temperature in case of fault: 110 °CTemperature range at storage: -40 +85 °CPermitted rel. humidity during operation: 5-85 %Lifespan:ECG lifetime: 35000 / 50000 hCapabilities:Dimmable: YesDimming interface: Phase CutDimming range: 5-100 %Dimming method: Amplitude ModulationOverheating protection: Automatic reversibleOverload protection: Automatic reversibleShort-circuit protection: Automatic reversibleNo-load proof: YesIntended for no-load operation: NoMax. cable length to lamp/LED module: 2.0 mSuitable for fixtures with prot. class: I / IIType of connection, input side: Push terminalType of connection, output side: Push terminalSuitable for through-wiring: NoDetection angle (PIR): -Detection angle (Light sensor): -Number of channels: 1Control interface: -Certificates & standards:Approval marks – approval: CEStandards: Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 6100-4-5/Acc. to IEC 61547Protection class: I,IIType of protection: IP20Logistical data:Commodity code: 85044083900Environmental information:Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)Date of Declaration: 23-08-2023Primary Article Identifier: 4052899617308Candidate List Substance 1: LeadCAS No. of substance 1: 7439-92-1Safe Use Instruction: The identification of the Candidate List substance is sufficient to allow safe use of the article.Declaration No. in SCIP database: 9bb8ced1-6cd2-4aca-bb2e-b4da1b28f39f