Black, empty, INT 800x370xH140(45+95)mm, EXT 850x440xH158mm, 6,2kg, 41,44L

OT FIT 55/220-240/1A0 CS L G2OPTOTRONIC FIT CS L G2 | Linear / Area Constant Current – Non dimmableIntended for use with constant current LED modules.The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.Product family features:Line frequency: 0 Hz | 50 Hz | 60 HzVersatile scope of application due to output power range of up to 75 WSupply voltage: 220…240 VAvailable with output current range: up to 1,400 mASELV systemProduct family benefits:Flexible current setting (DIPswitch – 4 currents)Lifetime: up to 100,000 h (temperature at Tc - = 65 °C, max. 10 % failure rate)High efficiencyHigh quality of light thanks to low output ripple currentFulfill safety requirement due to overload, overtemperature, Hot Plug protectionAreas of application:Linear lighting for office, education, storage areas and retailInstallation in emergency lighting systems according to IEC 61347-2-13, appendix JSuitable for luminaires of protection class IElectrical data:Nominal input voltage: 220-240 VMains frequency: 0/50/60 HzInput voltage AC: 198-264 VInput voltage DC: 176-276 VTotal harmonic distortion: < 10 %Power factor λ: 0.87C-0.98Device power loss: 7.0 WNetworked standby power: not relevantInrush current: 20 AMax. ECG no. on circuit breaker 10 A (B): 16Max. ECG no. on circuit breaker 16 A (B): 25Surge capability (L/N-Ground): 2 kVSurge capability (L-N): 1 kVProtective conductor current: 2.0 mANominal output voltage: 27-51 VU-OUT (working voltage): < 60 VNominal output current: 800 mA / 900 mA / 975 mA / 1050 mADefault output current: 1000 mAOutput current tolerance: ±7.5 %Output ripple current (100 Hz): < 5 %Output PSTLM: ≤1Output SVM: ≤0.4Nominal output power: 14.0-53.6 WDimensions & weight:Product weight: 217.00 gLength: 280.0 mmWidth: 30.0 mmHeight: 21.0 mmMounting hole spacing, length: 270.0 mmMounting hole spacing, width: not relevant mmCable cross-section, input side: 0.5-1.5 mm²Cable cross-section, output side: 0.5-1.5 mm²Wire preparation length, input side: 8.5-9.5 mmWire preparation length, output side: 8.5-9.5 mmColors & materials:Casing material: MetalTemperatures & operating conditions:Ambient temperature range: -25 +50 °CMaximum temperature at tc test point: 80 °CMax.housing temperature in case of fault: 110 °CTemperature range at storage: -25 +85 °CPermitted rel. humidity during operation: 5-85 %Lifespan:ECG lifetime: 50000 / 100000 hAt maximum Tc = 75°C / 10% failure rate / At Tc = 65°C / 10% failure rateCapabilities:Programming interface: DipswitchControl interface: NoConstant lumen function: NoMax. cable length to lamp/LED module: 2.0 mSuitable for fixtures with prot.: class ISuitable for emergency lighting: YesType of connection, input side: Push terminalType of connection, output side: Push terminalNumber of channels: 1Overheating protection: Automatic reversibleOverload protection: Non-reversibleShort-circuit protection: Automatic reversibleIntended for no-load operation: NoNo-load proof: YesProgramming:Programming device: DIPswitchCertificates & standards:Approval marks – approval: CE / EL / ENEC 05 / EAC / CCC / RCM / BISStandards: EN 61347-1 / EN 61347-2-13 / EN 62384 / EN 61000-3-2 / EN 61000-3-3 / EN 61547Type of protection: IP20Logistical data:Commodity code: 85044083900Environmental information:Date of Declaration: 13-02-2025Primary Article Identifier: 4052899522558Declaration No. in SCIP database: In workSCIP_STATUS: In work